
Multilayer Flex Circuits
Multilayer Flex Circuit
Multilayer flex circuits built up to 10 layers on PI, PET or LCP, with 30/30 µm minimum line width and spacing and 0.1 mm minimum holes.
Specifications
- Layer Count
- Up to 10 (multilayer)
- Min Trace/Space
- 30/30 µm (min); 50/50 µm with buried vias
- Substrates
- PI / PET / LCP
- Copper Thickness
- RA/ED, 1/6 – 4 oz
- Min Hole Diameter
- 0.1 mm
- Finished Thickness
- Min 0.05 mm
- Surface Finish
- ENIG / OSP
- Prototype Lead Time
- 6–8 days (multilayer samples)
- Mass Production Lead Time
- 9–11 days
When the routing no longer fits on two copper layers, a multilayer flex circuit stacks the extra layers inside one flexible build, so denser designs stay flexible.
Multilayer builds run up to about 10 layers. Minimum line width and spacing is 30/30 µm without buried vias, and 50/50 µm with buried vias on multilayer boards. Minimum hole diameter is 0.1 mm.
Base materials are PI, PET and LCP. Copper is RA or ED, from 1/6 oz to 4 oz. Finished thickness starts at 0.05 mm. Surface finishes are ENIG and OSP.
Multilayer samples ship in 6–8 days, and mass production takes 9–11 days.
To get a quote, send your Gerber files with the layer count, material and delivery target — the team will review them and reply.